6CH DMX512 decoder 5-24V decoder input power option > LED Controller > Product > Home
All Products
News

How much do you know these decorate choose lamp myth?
How much do you know these decorate choose lamp myth? LED lighting products quality inspection&...

LED High Bay Fixture is certified for hazardous locations.
LED High Bay Fixture is certified for hazardous locations.

The heat of LED products and the heat dissipation of LED
In the days that advocates energy-saving and environmental friendly, LED will be the most promising ...

Contact Us

Gidealed Lighting Co.,Ltd 

Tel:0086-750-2098318   

Phone:0086-13826159758

Email:sales@gidealed.com

Postcode:529080
Add:No.1 Minhui Rd,Gaoxin Developement District,JiangMen,

Guangdou,China

        


6CH DMX512 decoder 5-24V decoder input power option

 Model:GD6CH-DMX512  6CH  DC5-24V  constant decoder
Detailed Product Description

Introduction:
Welcome to use the 6CH constant decoder,which take advantage of advanced

microelectronic control technology.

This technology changes the international fashion DMX512/1990 standard digital control signals into analog control signals.

There're 1~6 output channels; each channel can achieve 256 control levels.This constant decoder is used when DMX512 control equipment control general LED lighting.

Products Performance:

Input Power:DC5V~DC24V

Maximum load current: 6A/CH×6

Maximum power load:180W(5V) 432W(12V) 864W(24V)

Output gray level:256

Input Signal: DMX512/1990

Output signal:6 channels Constant PWM

Output DMX:6 channels

DMX512 socket standard RJ45;Ethernet port and standard XLR-3 caron plug

Size:L155*W88*H32

Basic functions:

There are 6 output channels, can connect with single or RGB lamps;

0-100% dimming output,each channel 256 gray levels;

International standard DMX512 input protocol,address code set by DIP switches;

Wide voltage DC input DC5V ~ DC24V;

Each occupied by 6 DMX address.

Structure Drawing:



 Data Drawing:

Decoder to use:

The first DMX address setting:

The decoder set the address bit by coding switch, of which 1-7 is for setting the start address of the Binary numeric code switch of DMX512, the first one is the

lowest position, the ninth one is the highest Bit of addr.code can be set to 127.

DMX512 start address code is the sum of switches 1-8,at the same time turn

downside of the code switch(ON set to"1"),then the value of the bit can be gotten;

coding switch up (set to "0"), the value of the bit is 0.

Example 1:

As the following Schematic 1, DMX512 start address is set to 37, encoding the No.6,3,1 position on switch dial to "1",others set to "0", then the sum of the switch

1-8 code value  is 32 + 4 + 1,that's the DMX512 start address 37.

Note:It'll be automatic operation mode when the no.10 switch is turned down.

Effect  choice(button switch no.1-4)

1.Dial no.1:autocycle                               2.Dial no.2:colorful gradients                

3.Dial no.1&2:scan left                            4.Dial no.3 :scan right          

5.Dial no.1&3:colorful  chasing               6.Dial no.2&3 :left  accumulation

7.Dial no.1,2&3:right accumulation         8.Dial no.4 :glint        

9.Dial no.1&4 :jump                                10.Dial no.2&4:scan back and forth      

11.Dial no.1,2&4 :back&forth accumulation   12.Dial no.3&4 :gradient &chase

13.Dial no.1,3&4 :scan accumulation     14.Dial no.2,3&4:scan accumulation   

15.Dial no.1,2,3&4 :gradient &jump

Speed choice(button  switch5-7)

1.Dial no.5 :0.5s       2.Dial no.6 :1s    3.Dial  no.7 :1.5s    

Decoder to use:

The first DMX address setting:

The decoder set the address bit by coding switch, of which 1-7 is for setting the start address of the binary  numeric code switch of DMX512, the first one is the lowest position,the ninth one is the highest  bit  of address code can be set to127.

DMX512 start address code is the sum of switches 1-8,at  the same  time turn

downside of  the code switch (ON set to "1"), then the value of the bit can be

gotten;coding switch up (set to "0"),the value of the bit is 0.

Example 1:

As the following Schematic 1, DMX512 start address is set to 37, encoding the No.6,3,1 position on switch dial to "1", others set to"0", then the sum of the switch

1-8 code value is 32 + 4 + 1, that is the DMX512 start address 3.


Installation Notes:

a. This kind of controller works only under DC5V-24V, which is  provided by  the matched controllable main power, or else the controller will be damaged.

b. The UTP wire is connected hand in hand to make the cable, when two or more controller connected.

c. The power supply should be off when connecting the electric wires, and it can be turned on till making sure the wires are connected correctly and the indicator

of  main power in red is lighting.

d. Controller should work under the environment of adequately ventilated,dry,not

corroded,no flammable gas  and rust.

e.Pls check the wires connection regularly so that the wires of aged,rust-eaten

and damaged insulation spacer can be replaced timely.

Gidealed Lighting Co.,Ltd 

Tel:0086-750-2098318   

Phone:0086-13826159758

Email:sales@gidealed.com

Postcode:529080
Add:No.1 Minhui Rd,Gaoxin Developement District,JiangMen,

Guangdou,China

        


Send your inquiry directly to us

(0 / 3000)